Battery production machinery suppliers in Europe
The 12 battery machinery suppliers here sell the equipment that makes cells and packs rather than the batteries themselves. The category splits by process step. Slurry mixing, electrode coating and calendering sit at the front, with slitting and winding after them. Formation and end-of-line testing sit at the back. Module and pack assembly is a separate discipline again, closer to automotive body shop engineering than to chemistry.
Every company in this category
12 records-
ANDRITZ
- Employees
- 10000+
- Ownership
- Publicly listed
- Role under the EU battery rules
- Supplies an obligated operator
-
Bühler Group
- Employees
- 10000+
- Ownership
- Privately held
- Role under the EU battery rules
- Supplies an obligated operator
-
Coatema Coating Machinery
- Ownership
- Privately held
- Role under the EU battery rules
- Supplies an obligated operator
-
Digatron Power Electronics
- Ownership
- Privately held
- Services
- formation systems, battery cyclers, end-of-line test
- Standards named on their site
- ISO 9001
-
Dürr
- Employees
- 10000+
- Ownership
- Publicly listed
- Services
- electrode coating lines, drying, solvent recovery, calendering, slitting
-
Grob-Werke
- Employees
- 5000-10000
- Ownership
- Privately held
- Role under the EU battery rules
- Supplies an obligated operator
-
Kampf Schneid- und Wickeltechnik
- Ownership
- Privately held
- Role under the EU battery rules
- Supplies an obligated operator
-
Matthews Engineering
- Ownership
- Subsidiary
- Parent company
- Matthews International Corporation
- Services
- calendering systems, dry electrode equipment, lamination
-
Munters
- Employees
- 2000-5000
- Ownership
- Publicly listed
- Services
- dry rooms, dehumidification, climate control
-
PEC
- Ownership
- Privately held
- Role under the EU battery rules
- Supplies an obligated operator
-
Schuler Group
- Ownership
- Subsidiary
- Parent company
- ANDRITZ AG
- Role under the EU battery rules
- Supplies an obligated operator
-
TRUMPF
- Employees
- 10000+
- Ownership
- Privately held
- Pricing model
- Subscription
Browse by country
What to check before you shortlist
One requirement here is not a machine at all. Cell production needs a dry room, so dehumidification is a plant decision taken long before a coater is ordered. One company in this category does nothing else. Treat it as part of the building programme rather than as an accessory to the line.
Settle early whether the order is a pilot line or a production line, because one supplier will often sell both and the two behave nothing alike. A pilot proves a process and tolerates hand loading. A production line has to hold yield at rate for years, which turns the conversation into throughput guarantees, spare part availability and the response time on a stopped line.
Capital equipment is a multi-year relationship, so check the company as carefully as the specification. Commissioning, acceptance testing and process support all run past delivery. At least one record in this directory carries a note about a change in corporate status, which is the kind of detail to confirm at source before a purchase order rather than after one.
Germany holds most of this category. Austria, Switzerland, Sweden and Belgium account for the rest, one company each. That is a small sample rather than a map of the European supply base. More are added as records are checked. Traceability also enters here: cell and component marking is installed on the line, so the equipment decision and the identifier decision land on the same engineering team.
Questions buyers ask before they shortlist
Can one supplier deliver a complete cell line?
Rarely on its own. Front-end electrode processing, cell assembly and formation are normally bought from different specialists and then integrated. Some groups here cover several steps. A few also build recycling process equipment. Put any single-source claim to the test by asking which steps are built in-house and which are resold, because integration risk follows that answer.
What belongs in the acceptance test?
The material, the rate, the run duration and the yield definition, all agreed before the machine ships. A run on your own material rather than the supplier's demonstration coating is what proves a line. Write down who pays for a repeat run and what counts as an equipment fault rather than a recipe fault.
Is the dry room part of the machine order?
No. It is a building service, bought separately and normally earlier. Dehumidification is sized against the room volume, the air change rate and the dew point your process needs, so it is settled with the plant designer rather than with the coating supplier. One company listed here specialises in that work and does no other part of the line.
How do we check a machinery supplier will still be there in five years?
The same way you would for any capital purchase: filings, ownership and any restructuring news, read at source rather than taken from a directory. That includes this one. Our records carry a source URL and a check date, nothing more. For equipment that takes a year to commission and a decade to run, doing that check yourself before the order is worth the hour.